Sunday, December 25, 2016

Oh Ho Ho Ho Ho! Daddy Scored.

It's going to take some fucking around but eventually I am going to wind up with this,


The Wifely Unit did good.

She started asking me what I wanted for Christmas and I told her I wanted a new windshield for the El Camino.

Nope, she wasn't having none of that, too much hassle.
That would have been a piece of cake in hindsight.
I rattled off a couple of other minor thing and she kept shooting me down so I finally told her, what I really want is...

Blink blink.

A what?

Yeah, a mini lathe, I just happen to have a picture of one right here.

So I showed her and then went about my day.
Then I got a 25% off Harbor Freight coupon in my Email that was only good for one more day so I sent that to her. Come to find out she had already got me a bunch of gift cards so she had to drive back down there, use those and get the lathe.
One problem, they didn't have the 7X12 model.
It's an order only item. They gave her some song and dance about it being something they don't even carry in their warehouse.

So she got me the 7X10 unit.

She's a good woman that girl.

It's sitting out in the garage, still in the crate.
I also scored on another $150 worth of Harbor Freight gift cards from various members of the family.

Those are going towards the other item I have been wanting for two years that she keeps shooting down.


My current work bench consists of three 2X6's sitting on a couple of plastic saw horses.
Not exactly top of the line but it works to a point. Very much in the way though.


So tomorrow bright and early, say Noonish when I finally get woke up, I am loading up the 7X10 and hauling it back to them and getting the 7X12 ordered. According to my miscalculations using their numbers from the ads, it's only going to be another $30 difference to get the longer unit.

It's like sex, those extra two inches make all the difference in the world.

When it finally shows up then the real fun begins. I have been watching YouTube videos for a week that deal with those units specifically and they have..... issues.

The very first thing that needs to happen is to tear the thing apart.
The wife is going to freak, the fuck, out.

They are covered in grease everywhere to keep them from rusting while in storage and the tolerances leave much to be desired.
Everything will have to be checked for clearances, alignment, loose fasteners and damage. While it is apart I will be going to NAPA and getting an Industrial belt right from the get go so I won't have to replace the cheap Chinese one in it in two months anyway.

Then there is the not so small issue of tooling and upgrades that are in the immediate future.
It is very easy to surpass the cost of the lathe to begin with just getting upgrades and tooling.

That is going to be a little here, a little there thing.

But, I am pretty stoked about it.

The very first order of business today is to get my sorry ass out in that disaster of a garage and start getting crap piled up to go away, something I have been working on slowly ever since we moved into this joint.
I know for a fact that I have already made six trips to the dump and I am going to bite the bullet hard this time and get rid of some shit that I am never going to use but hate to get rid of.

There is only so much square footage out there and some of it needs to be reclaimed.

I certainly hope you all had a nice Christmas as well, friends and family are always a big part of the season and I think that is the one thing I do like about it.
I do know that I am glad it's over though.
Now back to our regularly scheduled programming.

Thanks for stopping by .



9 comments:

Anonymous said...

Keep us posted on your lathe project. I want to get one, but need to sell my "67 chevy truck to make it happen. I don't know shit about metal working, been pounding on my thumb (carpenter) for 39 years and want to learn something that I want to do vs. need to do.
DixieDennis

Gary in Bama said...

Nice unit cut slow and don't chatter the cut it will hold up ok. Keep the carbide cutter sharp and it get the job done. next year ask for the mini mill :).

SiGraybeard said...

I have one of those HF workbenches. It ended up being a little bit of a workbench kit, I mean there were one or two places that didn't quite fit like the directions said, but now that it's in place, it's good and stable. Compared to a lot of benches on the market, they're a good buy. Never went through the 8x12 stage, though. Went from my 3x18 Sherline to a 9x20 class lathe.

Anonymous said...

you are one lucky human

so what devious need will you need a lathe for?

Wildflower



drjim said...

Not much screams "MAN CAVE!" louder than a few machine tools!

My Dad was a Tool and Die Maker, so I know my way around a machine shop fairly well.

Congrats, and enjoy.

Phil said...

Yep, she even got me the sign a few years ago.

http://www.sports-4-less.com/product/oakland-raiders-man-cave-sign/

Phil said...

Dang it, I was really hoping you would have some words of wisdom for me too.
Between you and Irish, I'm sure you guys can help me out if I can't find what I'm looking for on the internet.

I'm still waiting for Irish to show up pointing and laughing.

The work bench looks to be a cross between IKEA and Harbor Freight so I know I can count on some kind of aggravation putting it together.

Anonymous said...

Congratulations on your tool score, bet it comes in handy soon ! Big time wifey points for getting you something you REALLY need !

SiGraybeard said...

Irish is a pro, I'm really a hobbyist.

I think the two sites that everyone talks about are:
http://www.mini-lathe.com/
http://www.varmintal.com/alath.htm

Both have tons of information. Since the 7x lathes are the most popular ones out there, you can find lots of videos and other sources on line.

I have a lot of bookmarks I can send by email.

Fair Use Notice

Fair Use Statement: This site may contain copyrighted material, the use of which may not have been authorized by the copyright owner. I am making such material available in an effort to advance understanding of environmental, political, human rights, economic, democracy, scientific, and social justice issues, etc. I believe this constitutes a ‘fair use’ of any such copyrighted material as provided for in section 107 of the US Copyright Law. In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those who have expressed a prior interest in receiving the included information for research and educational purposes. For more information go to: “http://www.law.cornell.edu/uscode/17/107.shtml” If you wish to use copyrighted material from this site for purposes of your own that go beyond ‘fair use’, you must obtain permission from the copyright owner.