Sunday, December 1, 2013

Sleep Tight

It's this easy to kick a door down.



Even my skinny ass has kicked more than one door clear off it's hinges.

Deadbolt or no, it's the door jamb that gives, not the door.

Something to think about.

4 comments:

Spud said...

That's why you put three inch screws in place of the normal ones for the striker plates. Same for the hinges.

Mayberry said...

Had to kick the side door to my garage in once. After repairing the frame and adding the longer screws as Spud mentioned, I lag bolted a piece of 2 inch stainless angle through the frame and stud. That door won't be kicked in again, it'll take a battering ram...

Robert Fowler said...

We've been talking about replacing our front door. I told SW that we need to look into a door with a steel frame. Once it's lag bolted into place it's going to take a big ram to get it open.

Anonymous said...

I went all out on ours (well, within our meager budget of course). Commercial grade steel doors, locksets and frames. Grouted into cmu walls, the cavities at jambs filled with concrete to minimize jamb spreaders. I figure that ought to slow them down.

Btw, some solid wood 'chocks' inserted into jamb (both sides), threshold and door head would also make it harder to kick in.

Fair Use Notice

Fair Use Statement: This site may contain copyrighted material, the use of which may not have been authorized by the copyright owner. I am making such material available in an effort to advance understanding of environmental, political, human rights, economic, democracy, scientific, and social justice issues, etc. I believe this constitutes a ‘fair use’ of any such copyrighted material as provided for in section 107 of the US Copyright Law. In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those who have expressed a prior interest in receiving the included information for research and educational purposes. For more information go to: “http://www.law.cornell.edu/uscode/17/107.shtml” If you wish to use copyrighted material from this site for purposes of your own that go beyond ‘fair use’, you must obtain permission from the copyright owner.